JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
WUXI DETA METAL PRODUCTS CO.,LTD
Add to Cart
Cold Rolled 2B 2D Surface 301 Stainless Steel Strip / Stainless Steel Coil Width 10 - 610mm
| Product Name | Stainless Steel Strips |
| Length | As required |
| Width | 3mm-1219mm or as required |
| Thickness | 0.15 - 3.0mm or as required |
| Standard | AISI,ASTM,DIN,JIS,GB,JIS,SUS,EN,etc. |
| Technique | Hot rolled / cold rolled |
| Surface Treatment | 2B or according to customer requirement |
| Thickness tolerance | ±0.01mm |
| Material | 201, 202, 301, 302, 303, 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S 309S, 410, 410S,420, 430, 431, 440A,904L |
| Application | It is widely used in high temperature applications, medical devices, building materials, chemistry, food industry, agriculture, ship components.It also applies to food, beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen. |
| MOQ | 1tons.We also can accept sample order. |
| Shipment time | Within 15-20 workdays after receiving deposit or L/C |
| Export packing | Waterproof paper, and steel strip packed.Standard Export Seaworthy Package.Suit for all kinds of transport,or as required |
| Capacity | 250,000 tons/year |
ASTM A240 for annealed condition
ASTM A666 for tempered material*
| Composition per ASTM A240 | |
| Carbon | .15 Max |
| Manganese | 2.00 Max |
| Phosphorus | .045 Max |
| Sulfur | .030 Max |
| Silicon | 1.00 Max |
| Chromium | 16.00 – 18.00 |
| Nickel | 6.00 – 8.00 |
| Nitrogen | .10 Max |
| Molybdenum | |
| Type 301 Mechanical Properties | |||||||
| ASTM | AISI Type (UNS) | Conditions | Tensile Strength, MPa (ksi), ≥ | 0.2% Yield Strength, MPa (ksi), ≥ | Elongation in 50 mm (2 in.), %, ≥ | Brinell Hardness (HB), ≤ | Rockwell Hardness (HRB), ≤ |
| ASTM A666 | 301 (UNS S30100) | Annealed | 517 (75) | 205 (30) | 40 | 217 | 95 |
| Full Hard | 1275 (185) | 965 (140) | 8 (<0.015 in.); 9 (≥ 0.015 in) | ||||
| Super Full Hard | 1860 (270) | 1790 (260) | – | ||||
| Half Hard | 1035 (150) | 760 (110) | 15 (<0.015 in); 18 (≥ 0.015 in) | ||||
| 3/4 Hard | 1205 (175) | 930 (135) | 10 (<0.015 in); 12 (≥ 0.015 in) | ||||
| 1/4 (quarter-hard) Hard | 862 (125) | 517 (75) | 25 | ||||
| 1/8 Hard | 690 (100) | 380 (55) | 40 | ||||
| 1/16 Hard | 620 (90) | 310 (45) | 40 | ||||
* Tempered mechanical properties are available upon request
Pots, Pans, Flatware, Counters, Sinks, Appliance components
Trim, Moldings, Wiper parts, Fastener parts
Dishwashers, Ovens, Refrigerators
Hinges, Doors, Frames, Roll formed sections, Spring clips, Clamps
Various equipment including conveyor belts
Aircraft, Trailer bodies, Rapid transit cars, Cargo containers
301 stainless steel flat rolled coil is non-magnetic in the annealed condition but becomes magnetic when cold worked.
Type 301 is used in fabrication by bending, roll forming, blanking, stretch bending and drawing. It’s high work hardening rate helps minimize wall thinning when deformed. Deep drawing may require intermediate annealing or higher nickel content.
