JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
WUXI DETA METAL PRODUCTS CO.,LTD
Add to Cart
Grade 65Mn Spring Steel Strip Thickness 0.3 - 3.0mm Within 1250mm Custom Cutting
Specification of our products
| Standard | Steel Strips |
| Steel Grade | 65Mn / AISI 1066 / 080A67 |
| Application | Spring Steel |
| Brand Name | Delta |
| Width | within 1250mm |
| Tolerance | ±1% |
| Thickness | 0.3 - 3.0mm as request |
| Other Material | SK5 SK4 SK2 65Mn 45Mn 40Mn 15CrMo 20Cr 40 Cr 10# 20# 35# 45# 50# 60# CK75 SPHC SPCC Q195-355 ST12 ST14 .etc |
| Standard | ASTM EN JIS GB DIN |
| Type | Strip |
| Technology | Cold Rolled |
At first Slowly heated to 730 ℃ and allow enough times, let the steel to be thoroughly heated, Then cool slowly in the furnace. Then 65Mn tool steel will get MAX 250 HB (Brinell hardness).
At the beginning, 65Mn steels should be heated uniformly to 830-860°C (1526-1580°F) until completely heated through. After about 30 min per 25 mm of ruling section is to be provided and then the steels should be immediately quenched in oil. Tempering of 65Mn Spring Steel
Tempering of 65Mn steels is performed at 540°C, Soak well at the selected temperature and soak for at least one hour per 25mm of total thickness. Hardness values at different temperatures after tempering
Mechanical Properties of 65Mn Steel Strip
The mechanical properties of 65Mn Spring Steels are outlined in the following table.
| Tensile strength | Conditions to yield strength | Elongation | Reduction of area | Hardness (Hot Rolled) | Hardness (Cold Drawn) |
| σb (MPa):≥980 | σ0.2 (MPa):≥785 | δ 5 (%):≥8 | ψ (%):≥30 | ≤302HB; |
Applications of 65Mn Steel Strip
65Mn steel, after heat treatment and cold drawing hardening, high strength, it has a certain toughness and plasticity; In the same surface hardening case, completely and the fatigue limit and alloy spring. But hardenability poor, mainly for the smaller size of the spring, such as regulating speed regulating spring, spring load, general machinery in the round, square spiral spring or pull wire for small mechanical spring.
Products and Size range of our 65Mn Steel Products
Grade Specification of our steel strip
| CHINA GB/T | USA ASTM | JAPAN JIS | GERMANY DIN | FRANCE NF | BIRTAIN BS | ISO | KOREA KS | TAIWAN CNS |
| 45 | 1045 | S45C | CK45 | XC45 | C45 | |||
| 50 | 1050 | S50C | CK50 | XC50 | 080M50 | C50 | ||
| 60 | 1060 | S60C | CK60 | XC60 | 060A62 | C60 | ||
| 70 | 1070 | S70C | CK70 | XS70 | S70 | |||
| 75 | 1075 | S75C | CK75 | XC75 | C75 | |||
| T10 | W1-9 | SK4 | ||||||
| T9 | W1-8 | SK5 | ||||||
| SK85 | --- | SK85 | ||||||
| 40Mn | 1043 | SWRH42B | 40Mn4 | 40M5 | 080A40 | SL,SM | ||
| 42Mn | ||||||||
| 65Mn | 1566 | S60C-CSP | CK67 | 080A67 | C60E4 | |||
| 55Si2Mn | 9255 | SUP 6 /SUP7 | 55Si7 | 55Si7 | 251H60 | 55SiCr7 | ||
| 60Si2Mn | 9260 | SUP 6 / SUP7 | 65Si7 | 65Si7 | 251H60 | 61SiCr7 | SUP3 | SUP6 |
| 62Si2Mn | ||||||||
| 75Cr1 | 75Cr1 | 75Cr1 | 75Cr1 | |||||
| 51CrV4 | 5160 | SUP9A | 51CrV4 | 51CrV4 | SPS5A | SUP9A | ||
| 30CrMo | G41300 | SUP13 | 35CrMo4 | SPS9 | SUP13 | |||
| 50CrVA | 6150 | SUP10 | 51CrV4 | 51CrV4 | 735A51 | 51CrV4 | SPS6 | SUP10 |
