AISI304 AISI316L Stainless Steel H Beam 200*200mm Welded Stainless Steel Beam

AISI304 AISI316L Stainless Steel H Beam 200*200mm Welded Stainless Steel Beam

H-beam product description

304 stainless steel H section steel is a more optimized section area distribution, strength to weight ratio more reasonable economic section efficient profile, because of its section and the English letter “H” the same name.Because each part of H-beam is arranged at right angles, H-beam in all directions has the advantages of strong bending ability, simple construction, cost saving and light weight structure, has been widely used.The inner and outer flanges of H-beam are parallel or nearly parallel, and the end of the flanges is at a right Angle, hence the name “parallel flange I-beam”.H-beam web thickness is smaller than the same high webs of ordinary I-steel, flange width is larger than the same high webs of ordinary I-steel, so it is also named wide edge I-steel.The section modulus, moment of inertia and corresponding strength of H-beam are obviously better than that of ordinary I-beam steel with the same single weight.Used in different requirements of the metal structure, whether it is to bear bending moment, pressure load, eccentric load shows its superior performance, can be compared with ordinary I-steel greatly improve the bearing capacity, metal saving 10% ~ 40%.H-beam steel has wide flange, thin web, many specifications and flexible use. It can save 15% ~ 20% metal in various truss structures.Because the flange inside and outside are parallel and the edge end is at a right Angle, it is easy to assemble and assemble into various components, thus saving about 25% of the welding and riveting workload, greatly speeding up the construction speed and shortening the construction period of the project.

Advantages of Stainless Steel H – beam

H-beam steel is a new type of economic construction steel.

H-beam section shape is economical and reasonable, good mechanical properties, rolling section of the point extension is more uniform, small internal stress, compared with ordinary I-beam, has the advantages of large section modulus, light weight, save metal, can make the building structure reduce 30-40%;And because the inside and outside of the legs are parallel, and the leg ends are at right angles, the assembled components can save up to 25% of the welding and riveting work.It is often used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundations, supports, foundation piles, etc.

H-section steel is a kind of economical section steel with more excellent section mechanical properties which is developed from the optimization of I-section steel, especially the section is the same as the English letter “H” so named.Its characteristics are as follows:

→ Wide flange, large lateral stiffness.Strong bending resistance.

→ The two surfaces of the flange are parallel to each other, making it easy to connect, process and install.

→ Compared with welding I-beam, the cost is low, high precision, small residual stress, no expensive welding materials and weld detection, saving about 30% of the production cost of steel structure.

→ Under the same section load.Hot-rolled H steel structures weigh 15%-20% less than traditional steel structures.

Compared with concrete structure, hot rolled H steel structure can increase the use area by 6%, and the structure weight is reduced by 20%-30%, reduce the internal force of structure design.

→ H beam can be processed into T beam, honeycomb beam can be combined to form a variety of cross section forms, Note: can provide a variety of materials, specifications of non-standard stainless steel bright rod!To meet the needs of engineering design and production.

H-beam steel is mainly used in engineering, plant equipment, mechanical equipment, Bridges, highways, civil houses, etc.Good mechanical and physical properties, firm, energy saving and environmental protection effect.H-beam steel is a kind of economical section steel, widely used in industry, construction, bridge, oil drilling platform and so on.