JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
WUXI DETA METAL PRODUCTS CO.,LTD
Add to Cart
Alloy Steel Plate, Low AS 4140/4130/ 8620 Chromoly Sheet Plate Hot Rolled & Forged Plates
Alloy Steel Plate Specification
| Specifications | Alloy Steel Plates |
| Width | 1219mm, 1000mm, 1800mm, 1500mm, 2000mm 2200mm 2400mm. etc |
| Thickness | 1mm-300mm |
| Length | 2440mm, 2000mm, 5800mm, 3000mm, 12000mm, 6000mm, 15000mm etc |
| Finish | Cold rolled sheet (CR), Hot rolled plate (HR) |
| Surface | Hot Rolled Surface |
| Form | Foils, Coils, Plain Sheet, Rolls, Strip, Shim Sheet |
What is Alloy Steel Plates?
Alloy steel plate, where the content of alloying material ranges between 1% to 50%, is referred to as alloy steel. Further, AS is classified into two groups i.e. High Alloy Steel plate and low alloy plate, depending on the content of alloying material used in them. While the corrosion resistance of alloy steel is much higher than regular carbon steel, the mechanical properties tend to be much higher as well. For instance, the tensile strength of 4130 Alloy Steel coil is approx 655 MPa. In order to use low alloy grade, for instance, 4140 Alloy Steel strips, a proper heat treatment conducted on them prevents the steel from going through ductile to brittle phase. Thus enabling them to be used at cryogenic temperature settings.
Alloys steel has been designed with a variety of alloying elements. An AS Plate is alloyed between 1% to 50% of alloys that help in determining their properties. Characterized as low or high alloy components the Alloy Steel Sheet performs exceptionally well in different stress-induced environments suited to its characteristics. However, the higher alloyed components have superior hardness and strength compared to the latter allowing them to exhibit different AS Sheet Gauge thicknesses.
|
|
Our Processing Service for Alloy Steel Plate
| Grades | Mn | Mo | C | S | P | SI | Cr |
|---|---|---|---|---|---|---|---|
| SA 387 Gr 5 Plates | 0.3 – 0.6 | 0.45 – 0.65 | 0.15 max | 0.03 | 0.035 | 0.5 max | 4.00 – 6.00 |
| SA 387 Gr 9 Plates | 0.30 – 0.6 | 0.9 – 1.1 | 0.15 max | 0.03 | 0.03 | 1.0 max | 8.0 – 10.0 |
| SA 387 Gr 11 Plates | 0.4 – 0.65 | 0.45 – 0.65 | 0.05 – 0.17 | 0.035 | 0.035 | 0.5 – 0.80 | 1.0 – 1.5 |
| SA 387 Gr 12 Plates | 0.4 – 0.65 | 0.45 – 0.6 | 0.05 – 0.17 | 0.035 | 0.035 | 0.15 – 0.4 | 0.8 – 1.15 |
| SA 387 Gr 22 Plates | 0.3 – 0.6 | 0.9 – 1.1 | 0.05 – 0.15 | 0.035 | 0.035 | 0.5 max | 2.0 – 2.5 |
Application of Alloy Steel Plates
